Kinova Link 6 User Manual Download Page 74

Page: 74 / 296

EN UG-020 Link 6 user guide r1.0

Brake

Release

Idle

Initialization

Maintenance

Fault

power on

SF07

active

SF07

inactive

Arm:

Operating modes:

Operational

Recovery

Figure 48: Timeline for SF07 before and after being triggered

on page 85

Robot safety protections and limits

To make sure the robot operates safely in its working environment, configure joint limits,

and

, and safety I/Os.

All tasks related to configuring the robot with respect to safety are performed by the

integrator

Important:

Safety parameters can be modified only when there is no power in the arm.

Figure 49: Accessing the safety pages

The

controller

prevents movement, speed, and force outside of the configured limits. The

configured limits are monitored by certain safety functions.
•

•

•

•

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands