Kinova Link 6 User Manual Download Page 219

Page: 219 / 296

EN UG-020 Link 6 user guide r1.0

211

• Use

Lock Presets

to control the Hand Guiding constraints in

Cartesian

translation and rotation

admittance mode.

Locks all x, y, and z axes. Cartesian movement is constrained. Only rotations are

possible.

Locks all θx, θy, and θz coordinates. Rotations are constrained. Only movement in

Cartesian translation are possible.

Cancels the selected lock preset. There are no constraints on the admittance mode.

• Any combination of zero or more axes, and zero or more angles, can be selected from

Locked

Axes

to control the Hand Guiding movement with greater precision.

Related topics

Mode: Hand Guiding

on page 102

Jog Cartesian panel

To control the position and orientation of the

end effector

of the robot, use the

Jog Cartesian

panel in Kortex Web App.

Important:

Jog Cartesian is accessible only when the

teach pendant enabling device

or an

external

enabling device

is held in the middle position.

Tap

Jog Cartesian

in the Robot control panel to access the

Jog Cartesian

panel.

Figure 173: Jog Cartesian button in the panel Figure 174: Jog Cartesian panel

Related topics

Mode: Manual Jog

on page 100

Translation and rotation from the Jog Cartesian panel

Control linear and angular motion of the tool by using the

Jog Cartesian

panel.

There are two sets of virtual joysticks.
• The linear joystick applies a translational motion to the

TCP

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands