Model 2461 Interactive SourceMeter® Instrument Reference Manual
Section 2: General operation
2461-901-01 A/November 2015
2-47
Figure 29: Exponent display format
From the front panel:
Press the
MENU
key.
1. Under System, select
Settings
.
2. Select the button next to Reading Format.
3. Select the reading format (
Prefix
or
Exponent
).
This setting takes effect immediately.
Over a remote interface:
•
SCPI commands: Refer to
(on page 6-42)
•
TSP commands: Refer to
(on page 8-65)
Customizing a message for the USER swipe screen
You can customize the message that is displayed on the USER swipe screen.
You must use a remote interface to customize the USER swipe screen.