Model 2461 Interactive SourceMeter® Instrument Reference Manual
Section 7: Introduction to TSP operation
2461-901-01 A/November 2015
7-33
Connecting an instrument in TSB
You must use the TSP command set with the Test Script Builder software. For information on
changing the command set, refer to
Determining the command set you will use
(on page 2-80).
To connect the Test Script Builder software to an instrument:
1. Click the
Open Instrument
icon in the script editor toolbar.
Figure 163: Opening an instrument connection in TSB
2. The Select Instrument dialog box opens. Select an existing instrument from the list, or type the
VISA resource ID of the instrument in the
Select or enter new instrument
box.
3. If needed, enter a password.
Figure 164: Select Instrument dialog box