Keithley 2461, Reference Manual, Page: 460 / 1109

Model 2461 Interactive SourceMeter® Instrument Reference Manual Section 6: SCPI command reference
2461-901-01 A/November 2015 6-83
SOURce subsystem
The commands in the SOURce subsystem configure and control the current source and voltage
source.
:SOURce[1]:CONFiguration:LIST:CATalog?
This command returns the name of one source configuration list.
Type Affected by Where saved Default value
Query only Not applicable Not applicable Not applicable
Usage
:SOURce[1]:CONFiguration:LIST:CATalog?
Details
You can use this command to see the names of source configuration lists stored on the instrument.
This command returns one name each time you send it. This command returns an empty string if
there are no more names to return. If the command returns an empty string the first time you send it,
no source configuration lists have been created for the instrument.
Example
:SOUR:CONF:LIST:CAT?
Send this command to return the name of one source configuration
list stored on the instrument. To get all stored configuration lists,
resend this command until it returns an empty string.
Also see
Configuration lists (on page 3-30)
:SOURce[1]:CONFiguration:LIST:CREate (on page 6-83)
:SOURce[1]:CONFiguration:LIST:CREate
This command creates an empty source configuration list.
Type Affected by Where saved Default value
Command only Recall settings
Instrument reset
Power cycle
Save settings Not applicable
Usage
:SOURce[1]:CONFiguration:LIST:CREate "<name>"
<name>
A string that represents the name of a source configuration list