Section 3: Functions and features
Model 2461 Interactive SourceMeter® Instrument Reference Manual
3-72
2461-901-01 A/November 2015
Pulse list sweep
The pulse list sweep allows you to set up a custom pulse sweep using a configuration list. You can
specify arbitrary pulse steps anywhere within the output range of the Model 2461.
When a pulse list sweep is initiated, the output goes from the bias level to the first specified pulse
level in the configuration list, and then back to the bias level for a specified delay and off time. The
next pulse goes from the bias level to the second specified pulse level in the configuration list and
back to the bias level. This pattern continues until every specified pulse level in the configuration list
has been output.
Figure 126: Pulse list sweep