Keithley 2461, Reference Manual, Page: 141 / 1109

Section 2: General operation Model 2461 Interactive SourceMeter® Instrument Reference Manual
2-114 2461-901-01 A/November 2015
Digitize measure connections
The connections for front-panel and rear-panel digitize measurements are shown in the following
graphics.
Figure 72: Front-panel measure connections: Digitize voltage
Figure 73: Rear-panel measure connections: Digitize voltage
Measure with digitize current or voltage using the front panel
To make a digitize current or voltage measurement using the front panel:
1. Make the connections as shown in Digitize measure connections (on page 2-114).
2. Press the
FUNCTION
key.
3. Select the
Digitize
tab.
4. Select the digitize function you want to use.
5. Press the
MENU
key.
6. Under Measure, select
Settings
.
7. Select the settings for your application. For descriptions of the options, refer to Measure Settings
menu (on page 2-27).
8. Press the TRIGGER key for 2 seconds and verify that the instrument is set to Continuous
Measurement.
The measurements display on the front panel.