Keithley 2461 Reference Manual Download Page 72

Page: 72 / 1109

Model 2461 Interactive SourceMeter® Instrument Reference Manual

Section 2: General operation

2461-901-01 A/November 2015

2-45

System Calibration menu

The

Calibration

menu allows you to start or manage auto calibration. Auto calibration

removes measurement errors that are caused by the effects of temperature and time on

components. You can also review factory adjustment and verification dates.

Option

Description

Last Run

Displays the date and time when auto calibration was last run.

Count

The number of times that autocalibration has been run since the

last factory calibration. The count restarts at 1 after a factory

calibration.

Warmup

Displays "Ready" if the instrument warmup period is complete. If

the warmup period is incomplete, displays "Not Ready" and the

time remaining.

Temperature
Difference

The difference between the temperature of the instrument in

Celsius (°C) compared to the temperature during the last auto

calibration. The instrument updates the temperature when autozero

references are refreshed. If autozero is set to off, the internal

temperature is not updated.

Start ACAL

Runs auto calibration.

System Info/Manage menu

The

Info/Manage

menu gives you access to version and serial number information

and settings for instrument firmware and reset functions.

Setting

Description

Version

The version of firmware that is installed in the instrument.

Serial Number

The serial number of the instrument.

Upgrade to New

This option initiates a firmware upgrade from a file on a USB flash

drive.

Downgrade to Older

This option returns the Model 2461 to a previous version of the

firmware from a file on a USB flash drive.

System Reset

This option resets many of the instrument settings to their default

values. For more information about what settings get reset, see

Reset default values

(on page 4-25).

Password Reset

Resets the access password to the default value.

Product Demo

Configures a brief demonstration of the graphing capability of the

Model 2461. To get correct results, you must have the appropriate

demonstration fixture connected to the inputs. For more

information, contact your local Keithley office, sales partner, or

distributor.

Display features

You can set the front-panel display to display the units of measure, number of digits, and customized

text messages for your applications.

Summary of Contents for 2461






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2461

Reviews:

Keithley 2461, Reference Manual, Page: 72 / 1109

Search results

Summary of Contents for 2461

Reviews: