Juniper JUNOSE 11.3, Configuration Manual

Page: 359 / 632

Fabric scheduler weights: multicast = 1 , unicast = 8
•
See show fabric weights.
show hosts
•
Use to display a list of configured network servers.
•
Field descriptions
•
Static Host Table—Information about the connected static hosts
•
name—Name of the host
•
ip address—IPv4 or IPv6 address of the host
•
type of host—Type of host; for example, ftp means an FTP server
•
NFS Host Table—Information about connected NFS servers
•
name—Name of the NFS server
•
userid—Identity for the user
•
groupid—Identity for the group
•
Example
host1# show hosts
Static Host Table
-----------------
name ip address type
---- ----------- ----
host1 10.2.0.124 ftp
hFtp 10.5.6.7 ftp
hTftp 10.5.6.7 tftp
Static Host Table
-----------------
name ip address type
----- ------------------------------------- ----
george 1111:2222:3333:4444:5555:6666:7777:8888 ftp
dsw 10.10.121.42 ftp
deab 10.6.128.12 ftp
mFtp 10.10.121.11 ftp
mTftp 10.10.121.11 tftp
mary 10.10.121.11 ftp
sd 10.10.121.80 ftp
NFS Host Table
--------------
name userid groupid
---- ------ -------
deab 2001 100
•
See show hosts.
show memory-management protection
•
Use to display information about memory management protection of the router.
•
You can use this command only in the support mode and it is not user configurable.
329 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Managing the System