Juniper JUNOSE 11.3, Configuration Manual

Page: 103 / 632

Table 10: Command Mode Overview (continued)
Exit from Mode Access to Mode Use of Mode Mode Name
• Use the exit command once to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
• From Global Configuration
mode, use the
parent-group command.
• Prompt:
host1(config-parent-group)#
• Configure an external
parent group. Parent Group
Configuration
•
Use the exit command once to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
•
To create a policy list,
from Global Configuration
mode use the
policy-list
command and identify the
type of policy list.
• Prompt:
host1(config-policy-list)#
•
Configure policy lists. Policy List Configuration
• Use the exit command twice to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
• From Global Configuration
Mode, use the
policy-list
command to create or
access a policy list. From
Policy List Configuration
Mode, use the
parent-group command.
• Prompt:
host1(config-policy-l
ist-parent-group)#
• Configure an internal
parent group in a
hierarchy. Policy List Parent Group
Configuration
• Use the exit command once to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
• From Global Configuration
mode, use the
policy-parameter
command.
• Prompt:
host1(config-policy-parameter)#
• Configure a policy
parameter. Policy Parameter
Configuration
•
Use the exit command once to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
•
From Global Configuration
mode, use the
pppoe-service-name-table
command, and specify the
alphanumeric name of the
PPPoE service name table.
• Prompt:
host1(config-pppoe-service-
name-table)#
•
Configure services for a
PPPoE service name
table. PPPoE Service Name
Table Configuration
• Use the disable command to
return to User Exec mode.
• Use the exit command to log out
of the CLI.
• Use the configure command to
enter Global Configuration mode.
• From User Exec mode, use
the
enable command.
• Prompt:
host1#
• Show system information.
• Set operating parameters.
• Access Global
Configuration mode.
Privileged Exec
73 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Command-Line Interface