Juniper JUNOSE 11.3, Configuration Manual

Page: 188 / 632

•
ip—Internet Protocol traps
• ldp—LDP traps
• link—SNMP linkUp and linkDown traps
•
log—System log capacity traps
•
mobileIpv4—Mobile IPv4 traps
• mplste—Mplste traps
• mrouter—Mrouter traps
•
ntp—E Series router proprietary traps
•
ospf—Open Shortest Path First traps
• packetMirror—Packet mirroring traps; packet mirroring–related SNMP categories and
traps are visible only to authorized users. See
JunosE Policy Management Configuration
Guide for information about using secure packet mirroring traps.
•
pim—Protocol Independent Multicast traps
• ping—Ping operation traps in disman remops (remote operations) MIB
• radius—RADIUS servers fail to respond to accounting and authentication requests
traps, or servers return to active service traps
•
routeTable—Maximum route limit and warning threshold traps; when this trap is
generated, the actual value of the exceeded warning threshold is displayed.
• snmp—SNMP coldStart, warmStart, authenticationFailure; the trap option. The
snmp-server enable traps snmp authentication command allows customized
treatment for SNMP authentication failure traps.
• sonet—SONET traps
• traceroute—Traceroute operation traps (in disman remops MIB)
•
trapFilters—Global filters for SNMP trap recipients
•
vrrp—Virtual Router Redundancy Protocol traps
To enable global trap categories, use the snmp-server enable traps command. To enable
trap categories for a specific host, use the snmp-server host command.
Trap Severity Levels
The router provides a method of filtering traps according to severity. Table 22 on page 158
describes the supported severity levels.
Table 22: Trap Severity Descriptions
System Response Severity Name
Severity
Number
System unusable Emergency 0
Immediate action needed Alert 1
Copyright © 2010, Juniper Networks, Inc. 158
JunosE 11.3.x System Basics Configuration Guide