Juniper JUNOSE 11.3, Configuration Manual

Page: 233 / 632

•
Threshold—Nearly full trap will be posted to the SNMP entity on this system when
this percentage is reached
•
Traps Sent—Number of times this event was posted to the SNMP entity on this
system
•
Example
host1# show bulkstats traps
Trap Type State Threshold Traps Sent
----------- ------- ---------- ----------
file-full enabled N/A 0
nearly-full enabled 5 0
•
See show bulkstats traps.
show bulkstats virtual-routers
•
Use to display information about the bulk virtual router group configuration.
•
Field descriptions
•
Collector—Number that identifies the particular data collector, in the range 1–65535
•
Virtual-Routers—Set of virtual router names (up to 64 names)
•
Example
host1# show bulkstats virtual-routers
Collector Virtual-Routers
--------- ---------------
33 serviceProviderABC
655 default
•
See show bulkstats virtual-routers.
Understanding Schemas
You can set a management schema for bulk statistics. A schema is a group of attributes
or counters that provide an efficient way to retrieve specific types of information about
the router. The bulk statistics application supports schemas listed in Table 24 on page 203.
NOTE: There are no explicit schema objects for the if-stack and system
schemas.
Table 24 on page 203 shows the type of data each schema retrieves.
Table 24: Data Retrieved According to Schema
Retrieves Schema
The interface and interface column configuration. It is a complete retrieval of the
ifStackTable, which stores the configured interfaces and their stacking relationship
on a router. if-stack
203 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring SNMP