Juniper JUNOSE 11.3, Configuration Manual

Page: 114 / 632

oam Configure Operations, Administration, and Management (OAM)
oam-pvc Configure Operations, Administration, and Management (OAM) for
Permanent Virtual Circuit (PVC)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
ubr Configure the Unspecified Bit Rate (UBR) service class
vbr-nrt Configure the Variable Bit Rate Non-Real Time (VBR-nrt)
service class
vbr-rt Configure the Variable Bit Rate Real Time (VBR-rt) service
class
Classifier Group Configuration Mode
In this mode, you can configure the set of rules for a classification group in a policy list
that you can attach to an interface.
From Policy List Configuration mode, type the classifier-group command and its
attributes, and then press Enter.
host1(config-policy-list)# classifier-group ipCLACL10 precedence 75
host1(config-policy-list-classifier-group)#
?
color Create a color policy
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
filter Create a filter policy
forward Create a forward policy
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
mark Create a set TOS byte policy
next-hop Create a next-hop policy
next-interface Create a next-interface policy
no Negate a command or set its default(s)
rate-limit-profile Create a rate-limit policy
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
suspend Suspend a policy rule
traffic-class Create a traffic class policy
user-packet-class Create a user packet class policy
Color Mark Profile Configuration Mode
In this mode, you can configure translation for a color to a type-dependent mark for TOS
or EXP for an IP, IPv6 or MPLS interface.
From Rate Limit Profile Configuration mode, type the color-mark-profile command and
specify a profileName, and then press Enter.
host1(config-rate-limit-profile)# mpls color-mark-profile myprofile
host1(config-color-mark-profile)#
?
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
green-mark Apply TOS mark to IP packets classified Green by the rate limit
hierarchy
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
Copyright © 2010, Juniper Networks, Inc. 84
JunosE 11.3.x System Basics Configuration Guide