Juniper JUNOSE 11.3, Configuration Manual

Page: 108 / 632

Table 10: Command Mode Overview (continued)
Exit from Mode Access to Mode Use of Mode Mode Name
• Use the exit command twice to
return to Global Configuration
Mode.
• Press Ctrl+z to return to Exec
mode.
• From Tunnel Group
Configuration mode, use
the
tunnel command and
specify the tag value (1-31)
of the tunnel.
• Prompt:
host1(config-tunnel-group-
tunnel)#
• Configure attributes for a
tunnel group tunnel. Tunnel Group Tunnel
Configuration
•
Use the exit command once to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
•
From Global Configuration
mode, specify the
mpls
tunnels profile command.
• Prompt:
host1(config-tunnelprofile)#
•
Configure tunnel profile
parameters. Tunnel Profile
Configuration
• Use the exit command once to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
• From Global Configuration
mode, use the
tunnel-server command
and identify the slot/port
location of the dynamic
tunnel-server port.
• Prompt:
host1(config-tunnel-server)#
• Configure the maximum
number of tunnel-service
interfaces for a dynamic
tunnel-server port. Tunnel Server
Configuration
• Use the enable command to enter
Privileged Exec mode.
• Use the exit command to log out
of the CLI.
• Log into system.
• Prompt:
host1>
• Change terminal settings
on a temporary basis.
• Show system information.
• Access Privileged Exec
mode.
User Exec
• Use the exit command once to
return to Global Configuration
mode.
•
Press Ctrl+z to return to Exec
mode.
• From Global Configuration
mode, use the
ip vrf
command.
•
Prompt:
host1(config-vrf)#
• Configure VRF
parameters for
BGP/MPLS VPNs. VRF Configuration
• Use the exit command twice to
return to Global Configuration
mode.
• Press Ctrl+z to return to Exec
mode.
• From Global Configuration
mode, use
aaa accounting
vr-group to enter VR
Group Configuration
mode.
• Prompt:
host1(config-vr-group)#
• Configure a virtual router
group for AAA broadcast
accounting. VR Group Configuration
Copyright © 2010, Juniper Networks, Inc. 78
JunosE 11.3.x System Basics Configuration Guide