Juniper JUNOSE 11.3, Configuration Manual

Page: 241 / 632

•
Use to collect IGMP usage data.
•
To collect IGMP statistics for one or more IGMP attributes, use the subtreelist keyword.
•
To retrieve the offset from the master interval at which the record was created for the
bulk statistics interface record, use the
time-offset keyword.
•
Example—Configures the schema to collect the destination address and time-offset
attributes for IGMP.
host1(config)# bulkstats schema 4 subtree igmp dest-address time-offset
•
Use the no version to delete the specified schema.
•
See bulkstats schema subtree.
bulkstats schema subtree policy
•
Use to collect statistics about a specified policy or a policy type, or based on color-coded
tags applied by a policy.
•
To collect statistics for a specified policy, use the policy-name keyword.
•
To collect data on input policies, local input policies, output policies, or secondary
output policies, use the
policy-type keyword.
•
To collect statistics based on color-coded tags applied by a policy, use the
policy-subtreelist keyword.
•
You create policies using the policy-list command. For information, see the JunosE
Policy Management Configuration Guide
•
Example—Configures the schema to collect statistics for a policy named XMYpolicy
host1(config)# bulkstats schema 4 subtree policy policy-name XMYpolicy
•
Use the no version to delete the specified schema.
•
See bulkstats schema subtree policy.
bulkstats schema subtree qos
•
Use to configure the bulk statistics schema to collect QoS statistics and configuration
information on egress queues belonging to different interface types.
•
To export egress queue statistics based on the queue attributes specified for the QoS
schema, use the
subtreelist keyword.
•
To export the summarized QoS rate statistics over each S-VLAN or ATM virtual path,
use the
export-summarized-stats keyword.
•
Specifying the export-summarized-stats keyword enables the export of the
summarized statistics over each S-VLAN or ATM virtual path. To ensure that you
successfully receive the summarized statistics, do not filter out the
forward-rate and
aggregate-dropped-rate attributes from the egress queue data. To accomplish this,
use either the bulkstats schema subtree qos all command or the bulkstats schema
subtree qos forwarded-rate aggregate-dropped-rate command.
•
Example 1—Configures the QoS schema to export all egress queue attributes
host1(config)# bulkstats schema 4 subtree qos subtreelist all
211 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring SNMP