Juniper JUNOSE 11.3, Configuration Manual

Page: 248 / 632

Table 29: Mapping Bulkstats Output to MIB Flies and CLI Configurations for Policy
Schema
(continued)
Description CLI Configuration MIB Object Name MIB File
Bulkstats Output
Column Name
- time-offset juniAcctngIfTimeOffset juniAcctng ifTimeOffse
The number of packets,
delivered by this sub-layer
to a higher (sub-)layer,
which were addressed to a
multicast address at this
sub-layer. For a MAC layer
protocol, this includes both
Group and Functional
addresses. This object is a
64-bit version of
ifInMulticastPkts
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
in-mcast-pkts ifHCInMulticastPkts RFC2863 ifHCInMulticastPkts
The number of packets,
delivered by this sub-layer
to a higher (sub-)layer,
which were addressed to a
broadcast address at this
sub-layer. This object is a
64-bit version of
ifInBroadcastPkts
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
in-bcast-pkts ifHCInBroadcastPkts RFC2863 ifHCInBroadcastPkts
Copyright © 2010, Juniper Networks, Inc. 218
JunosE 11.3.x System Basics Configuration Guide