Juniper JUNOSE 11.3, Configuration Manual

Page: 231 / 632

•
CollectorStopFailures—Number of times the bulk statistics collector failed during a
collector stop request
•
DriverErrors—Number of bulk statistics driver errors
•
FileSizeFulls—Number of times the bulk statistics application ran out of storage
space
•
CollectorFileNearlyFullTraps—Number of nearly full events posted to the SNMP
agent on this router
•
CollectorFileFullTraps—Number of file full events posted to the SNMP agent on this
router
•
Intervals—Number of times the bulk statistics collector has cycled through a collection
•
PrimaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a primary server
•
PrimaryFails—Number of primary server transfer failures
•
SecondaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a secondary server
•
SecondaryFails—Number of secondary server transfer failures
•
BulkStats Collector Statistics:
•
Index—Bulk statistics collector index
•
CurrSize—Current size of the bulk statistics storage file in bytes
•
CreateErrs—Number of bulk statistics collector create errors
•
Last Transfer Failure—Last time that the collector attempted to retrieve statistics
and was unsuccessful
•
Interval Start Time—Start of current interval or bulk collections. The collector
began collecting bulk statistics at this time.
•
Interval Stop Time—End of current interval of bulk collections
•
Dynamic Interface Collector statistics:
•
Collector Index—Bulk statistics collector index
•
Slot#—Slot number from which the statistics were obtained
•
Received—Number of records for dynamic interfaces that were reported by the
specified interface
•
Transferred—Number of record for dynamic interface that were written to the bulk
statistics (.sts) file.
•
Dropped—Number of records for dynamic interfaces that were dropped (that is,
not written to the bulk statistics [.sts] file)
201 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring SNMP