Juniper JUNOSE 11.3, Configuration Manual

Page: 386 / 632

host1# reload
2.
Reboot the router with the factory defaults.
:boot## boot config factory-defaults
3.
Reload the operating router.
:boot## reload
For more information about the reload and boot config commands, see “Booting the
System” on page 495.
adapter accept
•
Use to delete the configuration of the IOA in the specified IOA bay after you install a
different type of IOA.
•
This command enables you to create a fresh configuration for the module installed in
the IOA bay.
•
You can also use this command to accept an empty IOA bay that was previously
occupied.
•
Issuing this command reboots the line module associated with the IOA, but it does not
erase the line module’s configuration. To erase the configuration of the line module
and its associated IOAs, issue “slot accept” on page 357 command.
•
Issuing this command erases the interfaces associated with the specified IOA. To erase
the interfaces for both IOAs installed in a slot, issue the
slot accept command.
•
Depending on the previous configuration of the slot, the system might take a few
moments to execute this command.
•
Example—Accepting the IOA in the upper bay of slot 5 in an E320 router
host1(config)# adapter accept 5/0
•
There is no no version.
•
See adapter accept.
adapter erase
•
Use to delete the configuration of the specified IOA in the specified IOA bay before you
install a different type of IOA.
•
This command enables you to create a fresh configuration for the IOA to be installed
in the IOA bay.
•
Issuing this command reboots the line module associated with the IOA, but it does not
erase the line module’s configuration. To erase the configuration of the line module
and its associated IOAs, issue “slot erase” on page 358 command.
•
Issuing this command erases the interfaces associated with the specified IOA. To erase
the interfaces for both IOAs installed in a slot, issue the
slot erase command.
•
Example—Erasing the IOA in the upper bay of slot 5 in an E320 router
host1(config)# adapter erase 5/0
Copyright © 2010, Juniper Networks, Inc. 356
JunosE 11.3.x System Basics Configuration Guide