Juniper JUNOSE 11.3, Configuration Manual

Page: 329 / 632

•
Example
host1# show ftp-server
FTP Server state: enabled, 0 open connections
Statistics since server was last started:
attempts: 32
failed hosts: 5
failed users: 7
Statistics since last system reload:
attempts: 35
failed hosts: 5
failed users: 8
•
See show ftp-server.
show users
•
Use to display information about users of the vty lines.
•
Specify the all keyword to view information for all configured lines (both connected
and not connected).
•
Specify the detail keyword to view detailed information.
•
Field descriptions
•
line number—Number of the line to which the user is connected
•
line name—Name of the line, the service the line offers, and the relative line number
•
user—Name of the user
•
connected from—Location or IP address of the user
•
connected since—Date and time that the user connected to the line
•
idle time—Amount of time it has been since an entry was made from this line (detail
only)
•
virtual router—Virtual router used by this line user (detail only)
•
privilege level—Privilege level of this line user (detail only)
•
current command—Command currently being executed by the user over this line
(detail only)
•
Example 1
host1# show users
line connected
number line name user from connected since
------ -------------- ----- ---------- ----------------
0* console 0 console 02/12/2001 19:57
4 vty 3 (ftp) fred 10.10.0.64 02/12/2001 20:04
5 vty 4 (telnet) 10.10.0.64 02/12/2001 20:04
Note: '*' indicates current user.
•
Example 2
299 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Managing the System