Juniper JUNOSE 11.3, Configuration Manual

Page: 487 / 632

Monitoring DoS Protection Groups
Use the commands described in this section to monitor DoS protection groups.
show dos-protection-group
•
Use to display DoS protection groups.
•
If you do not specify a group, displays the names of the currently configured DoS
protection groups.
•
If you specify a group, displays information about the specified group.
•
If you do not specify the brief keyword, displays a list of references (interfaces and
templates) to the DoS protection group,
•
When *modified* appears next to the name of the DoS protection group. the group or
protocol within the group has changed from the preprogrammed value of the associated
group.
•
Example
host1(config)# show dos-protection-group
DOS Protection Groups:
Default (canned-group: “ default” ) *modified*
Uplink (canned-group: “ link” }
ATM (canned-group: “ pppoe” ) *modified*
VLAN (canned-group: “ mixed-access” )
•
See show dos-protection-group.
457 Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Passwords and Security