Juniper JUNOSE 11.3, Configuration Manual

Page: 305 / 632

host1#
show line console 0
dsr-detect disabled
configured speed 9600, current speed 9600
exec-timeout never
•
See show line console 0.
show terminal
•
Use to view parameters of the current console session.
•
Field descriptions
•
Length—Number of lines on the screen
•
Width—Number of characters on each line of the screen
•
data-character-bits—Number of bits per character
•
7—Setting for the standard ASCII set
•
8—Setting for the international character set
•
Speed—Speed of the console session
•
dsr-detect—Status of DSR signal detection
•
enabled—DSR signal must be detected for a user to log in to the console.
•
disabled—DSR signal need not be detected for a user to log in to the console.
•
exec-timeout—Time interval that the terminal waits for expected user input
•
Never—Indicates that there is no time limit
•
exec-banner—Status for the exec banner: enabled or disabled. This banner is
displayed by the CLI after user authentication (if any) and before the first prompt of
a CLI session.
•
motd-banner—Status for the MOTD banner: enabled or disabled. This banner is
displayed by the CLI when a connection is initiated.
•
login-timeout—Time interval during which the user must log in.
•
Never—Indicates that there is no time limit
•
Example
host1# show terminal
Length: 25 lines, Width: 80 columns
data-character-bits: 8 bits per character
Speed: 9600 bits per second
dsr-detect disabled
exec-timeout never
exec-banner enabled
motd-banner enabled
login-timeout 30 seconds
•
See show terminal.
275 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Managing the System