Juniper JUNOSE 11.3, Configuration Manual

Page: 362 / 632

------------------
total
invocations running percent
times per time running
task name invoked second (msec) time
--------------------- ------- ----------- -------- -------
aaaAtm1483Config 1 0 0 0%
aaaServer 52 0 260 0%
agent1 399 0 3600 0%
ar1EthHelp 362856 4 590 0%
.
.
.
templateMgr 48 0 540 0%
timerd 2346566 32 0 0%
~GONE~ 405202 5 184700 0%
~IDLE~ 0 0 360 0%
~INTERRUPT~ 8840490 121 51050 0%
average
time 5 1 5
per second minute minute
invocation utilization utilization utilization
task name (usec) (%) (%) (%)
------------------- ---------- ----------- ----------- -----------
aaaAtm1483Config 0 0 0 0
aaaServer 5000 0 0 0
agent1 9022 0 0 0
ar1EthHelp 1 0 0 0
ar1InternalNetwork 19 0 0 0
.
.
.
~IDLE~ --- 0 0 0
~INTERRUPT~ 5 0 0 0
•
See show processes cpu.
show processes memory
•
Use to display the amount of memory-related resources used by system processes.
Because the router allocates memory to system processes in chunks, issuing this
command performs a cleanup process to gather unused, available memory for
reallocation.
•
You can display different output variations by using the application , slot , and
virtual-router keywords. In addition, you can combine these keywords in specific ways
to display information combinations of application, slot, and virtual router.
•
The appearance of parentheses in the output is significant. The parentheses indicate
“ partial accountability” of the current memory size. In other words, the values are
accurate for the row in which they appear, but the memory value used for calculating
the sum total for the column may be smaller than the value displayed. This can result
in the sum total for the “ current size” column not matching the sum of the values that
appear within the column. This disparity can occur under shared memory conditions
Copyright © 2010, Juniper Networks, Inc. 332
JunosE 11.3.x System Basics Configuration Guide