Juniper JUNOSE 11.3, Configuration Manual

Page: 355 / 632

•
too cold—Module is too cold; system will go into thermal protection mode if the
temperature of any module drops below –5° C
•
IOA temperature—Temperature of the corresponding I/O module or IOA
•
IOA temperature status—Temperature condition of the corresponding I/O module
or IOA
•
normal—Temperature is in normal range
•
too hot—Module is too hot; system will go into thermal protection mode if the
temperature of any module exceeds 80° C
•
too cold—Module is too cold; system will go into thermal protection mode if the
temperature of any module drops below –5° C
•
processor temperature ranges—Displays the temperature ranges for the line modules
and SRP modules
•
IOA temperature ranges—Displays the temperature ranges for the I/O modules on
ERX7xx models, ERX14xx models, and the ERX310 router or IOAs on the E120 and E320
routers
•
fabric temperature ranges—Displays the temperature ranges for the SRP modules and
SFMs on the E120 and E320 routers
•
Example 1—Displays the environment of an ERX7xx model
host1#
show environment all
chassis: 14 slot (id 0x3, rev. 0x0)
fabric: 5 Gbps (rev. 1)
fans: ok
nvs: ok (81MB flash disk, 54% full)
power: A ok, B not present
AC power: A not present, B not present
srp redundancy: none
*** slots: cards missing or offline
online: 6 9
standby: 8
offline: 2
empty: 0 1 3 4 5 7 10 11 12 13
line redundancy: 1 redundancy group(s)
width 6, spare 8, primary 9
temperature: ok
timing: primary
primary: internal SC oscillator (ok)
secondary: internal SC oscillator (ok)
tertiary: internal SC oscillator (ok)
auto-upgrade enabled
*** system operational: no
processor processor IOA IOA
temperature temperature temperature temperature
slot (10C - 70C) status (10C - 70C) status
---- ----------- ----------- ----------- -----------
0 31 normal 30 normal
3 31 normal 30 normal
5 31 normal 30 normal
7 31 normal 30 normal
325 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Managing the System