Juniper JUNOSE 11.3, Configuration Manual

Page: 206 / 632

•
Use the no version to remove the notification from the event. Removal returns the
notification value to its default (0.0)
•
See notification id.
resource
•
Use to specify the total number of triggers that the virtual router allows.
CAUTION: When assigning wildcards, make sure to allow for enough trigger
resources.
•
Example
host1(config-mgmtevent-event)# resource 250
•
Use the no version to restore the default resource value (50).
•
See resource.
sample
•
Use to specify the MIB object that you want to sample for the trigger that you are
configuring.
•
Example
host1(config-mgmtevent)# sample value-id 1.3.6.1.2.1.60.1.2.1.1.7
•
Use the no version to remove the MIB object from the trigger. Removal returns the
sample value-id to its default (0.0).
•
See sample.
set
•
Use to perform an SNMP set operation under certain event conditions.
•
Example—Sets the administrative status of interface 123 to down (2)
host1(config-mgmtevent-event)# set context-name router1
host1(config-mgmtevent-event)# set id 1.3.6.1.2.1.2.2.1.7.123
host1(config-mgmtevent-event)# set value 2
•
Use the no version to remove the set operation.
•
See set.
snmp-server management-event
•
Use to launch the SNMP server event manager mode on each virtual router on which
you plan to manage events.
•
Example
host1(config)# snmp-server management-event
host1(config-mgmtevent)#
Copyright © 2010, Juniper Networks, Inc. 176
JunosE 11.3.x System Basics Configuration Guide