Juniper JUNOSE 11.3, Configuration Manual

Page: 245 / 632

Table 29: Mapping Bulkstats Output to MIB Flies and CLI Configurations for Policy
Schema
(continued)
Description CLI Configuration MIB Object Name MIB File
Bulkstats Output
Column Name
For packet-oriented
interfaces, the number of
inbound packets that
contained errors preventing
them from being deliverable
to a higher-layer protocol.
For character- oriented or
fixed-length interfaces, the
number of inbound
transmission units that
contained errors preventing
them from being deliverable
to a higher-layer protocol
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
in-errors ifInErrors RFC1213 ifInErrors
For packet-oriented
interfaces, the number of
packets received via the
interface which were
discarded because of an
unknown or unsupported
protocol. For
character-oriented or
fixed-length interfaces that
support protocol
multiplexing the number of
transmission units received
via the interface which were
discarded because of an
unknown or unsupported
protocol. For any interface
that does not support
protocol multiplexing, this
counter will always be 0
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
in-unknown-protos ifInUnknownProtos RFC1213 ifInUnknownProtos
215 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring SNMP