Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 581 / 1506

domain-authentication-key
Syntax
domain-authentication-key [ 0 | 8 ] authKey
no domain-authentication-key
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Assigns a password for authentication of IS-IS level 2 LSPs, CSNPs, and PSNPs. The
no version deletes the password.
NOTE: Issuing this command enables simple authentication of level 2 LSPs only. To
enable authentication of level 2 CSNPs or PSNPs, use the domain-authentication
command.
Options
0—indicates the authKey is entered in unencrypted form (plaintext); this is the
default option
■
■
8—indicates the authKey is entered in encrypted form (ciphertext)
■
authKey —password; string of up to 8 characters
Mode
Router Configuration
domain-authentication-key
■ 539
Chapter 5: D Commands