Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 759 / 1506

instance-interface-type
Syntax
instance-interface-type { instanceInterfaceType | set | superset }
no instance-interface-type { instanceInterfaceType | all }
Release Information
Command introduced in JUNOSe Release 7.1.0.
lag keyword added in JUNOSe Release 8.1.0.
set and superset keywords added in JUNOSe Release 9.2.0.
Description
Assigns an instance-interface type to a QoS parameter definition. Instance-interface
types indicate the interfaces for which QoS clients can assign QoS parameter
instances. You can specify up to eight instance-interface types for each parameter
definition. The
no version removes the specified instance-interface type from the
parameter definition.
Options
■
instanceInterfaceType —One of the following instance-interface types: atm, atm-vc,
atm-vp, bridge, ethernet, fr-vc, ip, ip-tunnel, ipv6, lag, l2tp-session, l2tp-tunnel,
lsp, pppoe, serial, server-port, svlan, vlan
■
set—Specifies an interface set as an instance-interface type
■
superset—Specifies an interface superset as an instance-interface type
■
all—Removes all instance-interface types
Mode
QoS Parameter Definition
Related Topics
Configuring a Basic Parameter Definition for QoS Administrators
■
■
Creating a QoS Parameter on an Interface Superset or Interface Set
instance-interface-type
■ 717
Chapter 10: I Commands