Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 897 / 1506

ip mobile home-agent
Syntax
ip mobile home-agent [ care-of-access acl ] [ lifetime lifetimeSeconds ]
[ replay replaySeconds ] [ reverse-tunnel-off ]
no ip mobile home-agent
Release Information
Command introduced in JUNOSe Release 9.0.0.
Description
Configures the Mobile IP home agent on a virtual router. Issuing this command does
not affect existing parameters such as lifetime, replay value, or care-of-access ACL
for any mobile node's existing binding. The new parameters take effect only upon
each re-registration or new registration. For example, configuring a shorter lifetime
does not cause an existing binding to be removed prematurely, but the new lifetime
value is used only upon re-registration by a mobile node so that both the mobile
node and the home agent are informed of the newly negotiated value. The
no version
disables the home agent service on the virtual router.
NOTE: The values for lifetime, replay, and care-of access configured per mobile host
by using the ip mobile host command override the values configured by using the
ip mobile home-agent command.
Options
■
acl —Name of the access control list applied to the care-of-access, which restricts
access for foreign agents or networks. You can override this care-of-access ACL
with other ACLs for specific host mobile nodes. By default, the router does not
apply a care-of-access ACL
■
lifetimeSeconds —Maximum number of seconds, in the range 5–65535, during
which registration requests are established; default value is 36,000 seconds. The
maximum lifetime configured for specific mobile nodes can override this lifetime
value
■
replaySeconds —Number of seconds, in the range 1–255, by which a registration
request can exceed the home agent configured time value; default value is
7 seconds
■
reverse-tunnel-off—Disables reverse tunneling support by the home agent, which
denies T bit registration requests. By default, reverse tunneling is enabled on the
router. When you modify support for reverse tunnels, the modification takes
effect only for subsequently accepted registration requests
Mode
Global Configuration
ip mobile home-agent
■ 855
Chapter 10: I Commands