Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 623 / 1506

ethernet oam lfm
Syntax
[ no ] ethernet oam lfm
Release Information
Command introduced in JUNOSe Release 11.1.0.
Description
Enables 802.3ah Ethernet Operation, Administration, and Maintenance (OAM)
link-fault management on an interface. Enabling IEEE 802.3ah OAM functionality
on a physical interface automatically triggers the discovery process. The default
discovery mode of the OAM entity is active. The
no version disables OAM link-fault
management on the interface.
NOTE: If you enable OAM on an interface without specifying other parameters for
the local OAM entity, such as the discovery mode for the OAM entity and the interval
at which OAM protocol data units (PDUs) are sent to the remote peer, default values
are assigned to all the attributes that are not manually configured.
Mode
Interface Configuration
Related Topics
ethernet oam lfm mode on page 589
■
■
Guidelines for Configuring 802.3ah OAM Link-Fault Management
■
Configuring 802.3ah OAM Link-Fault Management
ethernet oam lfm
■ 581
Chapter 6: E Commands