Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1375 / 1506

monitor vlan interface
Syntax
monitor vlan interface interfaceType interfaceSpecifier
[ interfaceType interfaceSpecifier ]* [ load-interval seconds ] [ display-time-of-day ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Displays bit rate and packet rate statistics over a specified time interval for one or
more VLAN subinterfaces. There is no
no version.
Options
interfaceType —One of the following interface types listed in Interface Types and
Specifiers on page 5
■
■
atm
■
fastEthernet
■
gigabitEthernet
■
lag
■
tenGigabitEthernet
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
seconds —Number of seconds in the range 5–30 that specifies the time interval
at which the router calculates bit rates and packet rates for the specified VLAN;
default value is 5 seconds
■
display-time-of-day—Sets time at which the router calculates the bit rate and
packet rate statistics for the current interval
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Privileged Exec, User Exec
monitor vlan interface
■ 1333
Chapter 13: M Commands