Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1158 / 1506

ipv6 rpf-route
Syntax
ipv6 rpf-route [ vrf vrfName ] ipv6Address / addressMask
{ nextHopIpv6Address | interfaceType interfaceSpecifier } [ distance ]
no ipv6 rpf-route [ vrf vrfName ] ipv6Address / addressMask
[ nextHopIpv6Address | interfaceType interfaceSpecifier ] [ distance ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.
Description
Customizes static IPv6 routes that the router can use to verify source addresses in
multicast packets. The
no version removes the static route.
Options
■
vrfName —Name of the VRF; string of 1–32 alphanumeric characters
■
ipv6Address —IPv6 address of the destination network
■
addressMask —Subnet mask for the destination network
■
nextHopIpv6Address —IPv6 address of the next hop
■
interfaceType— Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
distance —Number in the range 0–255 that indicates the preference for this route
Mode
Global Configuration
1116 ■
ipv6 rpf-route
JUNOSe 11.1.x Command Reference Guide A to M