Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 140 / 1506

address message-digest-key md5
Syntax
address { ipAddress | unnumbered interfaceType interfaceSpecifier }
message-digest-key keyID md5 [ 0 | 8 ] msgDigestKey
no address { ipAddress | unnumbered interfaceType interfaceSpecifier }
message-digest-key keyID
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Enables OSPF MD5 authentication and configures the MD5 key. The no version
deletes an MD5 key.
NOTE: If all the MD5 keys have been deleted, the authentication type is still MD5,
but you need to configure MD5 keys.
To disable MD5 authentication for the interface, use the address authentication-none
command.
You must issue the
address area
command before issuing this command.
Options
■
ipAddress —OSPF interface address previously specified with the address
command
■
unnumbered—Indicates that OSPF is running on an unnumbered interface
previously specified with the
address command
■
interfaceType —Interface type; see “Interface Types and Specifiers” on page 5
■
interfaceSpecifier— Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
■
keyID —Key identifier in the range 1–255
■
md5—Specifies use of the MD5 algorithm
■
0—Indicates the msgDigestKey is entered in unencrypted form (plaintext); this
is the default option
■
8—Indicates the msgDigestKey is entered in encrypted form (ciphertext)
■
msgDigestKey —OSPF password; string of up to 16 alphanumeric characters
Mode
Router Configuration
98 ■
address message-digest-key md5
JUNOSe 11.1.x Command Reference Guide A to M