Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1052 / 1506

ipsec transform-set
Syntax
ipsec transform-set transformSetName transform0
[ transform1 [ transform2 [ transform3 [ transform4 [ transform5 ] ] ] ] ]
no ipsec transform-set transformSetName
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Creates a transform set. Transform sets used for manually configured tunnels can
have only one transform. Transform sets used for signaled tunnels can have up to
six transforms. Transforms are numbered in a priority sequence in the order in which
you enter them. Each transform provides a different combination of data
authentication and confidentiality. The
no version deletes the transform set.
Options
transformSetName —Name of the transform set
■
■
transform0 through transform5 —AH or ESP transform; use the online Help to
view available transforms
Mode
Global Configuration
1010 ■
ipsec transform-set
JUNOSe 11.1.x Command Reference Guide A to M