Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 270 / 1506

baseline interface
Syntax
baseline interface interfaceType interfaceSpecifier [ vcd ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Sets a statistics baseline for an interface or a specific ATM virtual circuit. The router
implements the baseline by reading and storing the statistics at the time the baseline
is set and then subtracting this baseline whenever baseline-relative statistics are
retrieved. There is no
no version.
Options
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
vcd— Virtual circuit descriptor; number in the range 1–4294967295; an identifier
for the VC in other commands (ATM interfaces only)
Mode
Privileged Exec
228 ■
baseline interface
JUNOSe 11.1.x Command Reference Guide A to M