Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual, Page: 1325 / 1506

match ipv6 next-hop
Syntax
match ipv6 next-hop
{
accessListName [ accessListName ]* | prefix-list prefixListName
[ prefixListName ]* }
no match ipv6 next-hop [ [ accessListName ]* | prefix-list [ prefixListName ]* ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Matches any routes that have a next-hop router address passed by the specified
access list or prefix list. The
no version removes all next-hop match clauses from a
route map unless you specify either an access list or prefix list, in which case only
the list match is removed from the route map.
Options
accessListName— String of up to 32 alphanumeric characters
■
■
prefixListName— Name of a single prefix list; string of up to 32 characters
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Policy List Configuration, Route Map Configuration
match ipv6 next-hop
■ 1283
Chapter 13: M Commands