Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 549 / 1506

delta-sampling
Syntax
delta-sampling [ discontinuity-id mibId
| discontinuity-id-type { timeStamp | timeTicks } ]
no delta-sampling [ discontinuity-id ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies delta sampling for the trigger you are configuring. The no version returns
the trigger to the default sampling method—absolute-value sampling.
Options
discontinuity-id—Specifies a discontinuity MIB ID for the sample. The
discontinuity MIB ID monitors the sample for any discontinuity errors during
■
the sample frequency. If a discontinuity error occurs, the router removes the
sampling for that interval.
■
mibId —Object ID of the discontinuity MIB attribute that you want to use for this
trigger
■
discontinuity-id-type—Specifies a discontinuity ID type (either timeStamp or
timeTicks). The discontinuity ID type indicates the time value that you expect
for a specific sample.
Mode
SNMP Trigger Configuration
delta-sampling
■ 507
Chapter 5: D Commands