Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual, Page: 656 / 1506

existence-test
Syntax
existence-test { event eventOwner eventName |
startup { absent | present } | test-type { absent | changed | present } }
no existence-test [ event | startup | test-type ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Defines existence test values for the trigger that you are configuring, including binding
an event to the existence-test trigger, specifying a startup condition, and defining an
existence-test type. The
no version deletes the existence-test values for this trigger
or removes either the startup condition or event binding.
Options
■
eventOwner —Name of event owner that partially specifies event to trigger the
existence test; string of up to 32 alphanumeric characters
■
eventName —Name of event that partially specifies event to trigger the existence
test; string of up to 32 alphanumeric characters
■
startup—Specifies startup existence condition that you predict the sample to
follow; absent or present; you can specify both conditions in the same command
■
test-type—Specifies type of existence test to perform; absent, changed, or present;
you can specify one, two, or all three conditions in the same command
Mode
SNMP Trigger Configuration
614 ■
existence-test
JUNOSe 11.1.x Command Reference Guide A to M