Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1157 / 1506

ipv6 route-type
Syntax
For BGP
ipv6 route-type [ unicast | both ]
no ipv6 route-type
For OSPF
ipv6 route-type [ unicast | multicast | both ]
no ipv6 route-type
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
For BGP, specifies whether BGP IPv6 routes are available only for other unicast
protocols or for both unicast protocols and multicast protocols to perform RPF checks.
The
no version restores the default value, unicast.
For OSPF, specifies whether OSPF IPv6 routes are available only for unicast
forwarding, only for multicast reverse path forwarding checks, or for both. The
no
version restores the default value, both.
Options
unicast—Specifies that routes for the protocol are available only for unicast
forwarding
■
■
both—Specifies that routes for the protocol are available for both unicast
forwarding and multicast route path forwarding checks
■
multicast—Specifies that routes for the protocol are available only for multicast
route path forwarding checks
Mode
Router Configuration
ipv6 route-type
■ 1115
Chapter 10: I Commands