Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 449 / 1506

clear ip tunnel-routes
Syntax
clear ip tunnel-routes [ vrf vrfName ] { * | ipAddress ipMask }
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Clears and then refreshes a specified route or all dynamic routes from the tunnel
routing table of the virtual router or a specified VRF. There is no
no version.
Options
■
vrfName—Name of the VRF context from which routes are to be cleared
■
*—Clears all dynamic routes
■
ipAddress —IP address prefix for routes that are cleared; in 32-bit dotted-decimal
format
■
ipMask— Mask of the IP address prefix for routes that are cleared; in 32-bit
dotted-decimal or / N format
Mode
Privileged Exec
clear ip tunnel-routes
■ 407
Chapter 4: C Commands