Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 633 / 1506

ethernet oam lfm pdu-transmit-interval
Syntax
[ no ] ethernet oam lfm pdu-transmit-interval period [ mode { active | passive } |
pdu-lost-threshold pduLostPackets ]
Release Information
Command introduced in JUNOSe Release 11.1.0.
Description
Configures the minimum rate at which OAM protocol data units (PDUs) are
transmitted in milliseconds. Also, specifies the discovery mode of the OAM client
and the number of OAM packet data units (PDUs) from the remote peer that an
interface on the local client can miss before the link between the two entities is
considered down. The
no version removes the frequency values configured on the
interface for transmission of OAM PDUs to the remote peer. The no version with the
mode keyword deactivates link-fault management on the interface.
Options
■
period —Interval at which OAM PDUs are sent from the local OAM entity to the
remote peer to maintain the OAM association in an active state. Number in the
range 100-1000 milliseconds; default value is 1000 milliseconds
■
mode—Configures the OAM client mode for the discovery process
■
active—Sets the discovery mode of the local OAM client as active. In active mode,
the interface discovers and monitors the peer on the link if the peer also supports
IEEE 802.3ah OAM functionality. This is the default discovery mode of the OAM
client
■
passive—Sets the discovery mode of the local OAM client as passive. In passive
mode, an OAM entity does not initiate the discovery process. You cannot perform
link-fault management if you configure both the local client and the remote peer
for passive mode operation
■
pduLostPackets —The window for which the local client waits to receive OAM
packets from the remote peer before it generates a link fault event. Number of
expected OAM packets from the remote peer that the local OAM client can miss
before a link-fault event is triggered; a number in the range 3–10; default value
is 5
Mode
Interface Configuration
Related Topics
OAM Discovery Feature
■
■
Configuring 802.3ah OAM Link-Fault Management
■
ethernet oam lfm mode on page 589
ethernet oam lfm pdu-transmit-interval
■ 591
Chapter 6: E Commands