Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual, Page: 561 / 1506

disable
Syntax
To return to User Exec mode:
disable [ level ]
For DVMRP, RIP:
[ no ] disable
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
When used from Privileged Exec mode, exits Privileged Exec mode and returns to
User Exec mode.
When used from Router Configuration or Interface Configuration mode in the context
of a DVMRP configuration, disables DVMRP on the virtual router or interface. The
no version reenables DVMRP on the virtual router or interface.
When used from Router Configuration mode in the context of a RIP configuration,
disables RIP on the virtual router. The
no version enables RIP processing on the
virtual router.
Options
level— One of the following privilege levels; default value is 1
■
■
0—Allows the user to execute the help , enable , disable , and exit commands
■
1—Allows the user to execute commands in User Exec mode plus commands
at level 0
■
5—Allows the user to execute Privileged Exec show commands plus the
commands at levels 1 and 0
■
10—Allows the user to execute all commands except support commands,
which may be provided by Juniper Networks Customer Service
■
15—Allows the user to execute support commands
Mode
Address Family Configuration (RIP), Interface Configuration (DVMRP only), Privileged
Exec, Router Configuration (DVMRP or RIP)
disable
■ 519
Chapter 5: D Commands