Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1290 / 1506

log severity
Syntax
log severity { severityValue | off | severityNumber }
[ eventCategory [ instanceTree ] | eventCategory instanceTree | eventCategory ]
no log severity [ severityValue | off | severityNumber ] [ eventCategory
[ filters | instanceTree ] | eventCategory { filters | instanceTree } | eventCategory | * ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Sets the severity level for systemwide logs (that is, when no individual event category
is specified) or for a specific event category. The
no version returns severity changes
to their default settings or the systemwide setting.
NOTE: After you change the log severity level for an individual log event category,
you cannot use systemwide commands to subsequently change the severity level
for that category. To change individually altered log event categories using systemwide
commands, you must first change the log event back to its default setting.
Options
severityValue and severityNumber— Minimum severity of the log messages
displayed for the selected category; described either by a descriptive
■
term— severityValue —or by a corresponding number— severityNumber —in the
range 0–7. The lower the number, the higher the priority:
■
emergency or 0—System unusable
■
alert or 1—Immediate action needed
■
critical or 2—Critical condition exists
■
error or 3—Error condition
■
warning or 4—Warning condition
■
notice or 5—Normal but significant condition
■
info or 6—Informational message
■
debug or 7—Debug message
■
off—Disables systemwide log severity for all default level event categories when
no event category is specified or disables log severity for a specified event
category
■
eventCategory —Log category; refer to the CLI online Help for available options
■
filters—Removes all log filters for the event category
■
instanceTree —Log-specific filter parameters; refer to the CLI online Help for
available options
■
*—Resets all log severities, systemwide and individual, to default settings
1248 ■
log severity
JUNOSe 11.1.x Command Reference Guide A to M