Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1167 / 1506

isis csnp-interval
Syntax
isis csnp-interval seconds [ level-1 | level-2 ]
no isis csnp-interval [ seconds ] [ level-1 | level-2 ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Configures the IS-IS CSNP interval for the specified interface. The no version restores
the default value.
Options
seconds —Number in the range 0–65535; the interval of time in seconds between
the transmission of CSNPs on multiaccess networks for the designated router;
■
default value is 10 seconds, except for WAN interfaces, where the default value
is 0
■
level-1—Sets the interval of time between transmission of CSNPs for level 1
independently
■
level-2—Sets the interval of time between transmission of CSNPs for level 2
independently
Mode
Interface Configuration, Subinterface Configuration
isis csnp-interval
■ 1125
Chapter 10: I Commands