Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1031 / 1506

ip vrrp track
Syntax
ip vrrp vrid track objectName [ decrement priorityValue ]
no ip vrrp vrid track objectName
Release Information
Command introduced in JUNOSe Release 7.2.0.
Description
Tracks a specified object and changes the priority of that object when the state of
the object changes from an up state to a down state. The priority is decremented by
the specified value or by the default value (100; when no decrement value is specified).
The object priority is restored when the state of the object changes from a down
state to an up state. The
no version disables any tracking for the object.
Options
vrid —VRID identifier; a number in the range 1–255
■
■
objectName —Name of the object to track
■
priorityValue —Priority value of the VRRP router; a number in the range 1–255;
default value is 100
Mode
Interface Configuration
ip vrrp track
■ 989
Chapter 10: I Commands