Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1332 / 1506

match route-type
Syntax
match route-type internal [ intra | inter ] [ level-1 | level-2 ]
[ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*
match route-type external [ type-1 | type-2 ] [ level-1 | level-2 ]
[ internal [ intra | inter ] ] [ level-1 | level-2 ]*
match route-type { level-1 | level-2 } [ internal [ intra | inter ] ]
[level-1 | level-2 ] [ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*
match route-type { level-1 | level-2 } [ external [ type-1 | type-2 ] ]
[ level-1 | level-2 ] [ internal [ intra | inter ] ] [ level-1 | level-2 ]*
no match route-type [ internal [ intra | inter ] | external [ type-1 | type-2 ] |
level-1 | level-2 ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Matches routes of the specified type. The no version removes the match clause from
a route map unless you specify a value, in which case only that value is removed
from the match clause.
Options
internal—Specifies internal routes
■
■
intra — OSPF intra-area routes
■
inter — OSPF interarea routes
■
external—Specifies external routes
■
type-1—OSPF type 1 external routes
■
type-2—OSPF type 2 external routes
■
level-1—Specifies IS-IS level 1 routes
■
level-2—Specifies IS-IS level 2 routes
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Policy List Configuration, Route Map Configuration
1290 ■
match route-type
JUNOSe 11.1.x Command Reference Guide A to M