Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 1418 / 1506

mpls ldp sync
Syntax
From Interface Configuration mode and Subinterface Configuration mode:
[ no ] mpls ldp { isis | ospf } sync
From Router Configuration mode for IS-IS:
mpls ldp sync [ level-1 | level-2 | level-1-2 ]
no mpls ldp sync
From Router Configuration mode for OSPF:
mpls ldp sync [ areaId | areaIdInt ]
no mpls ldp sync
Release Information
Command introduced in JUNOSe Release 8.1.0.
Description
In Interface Configuration mode, synchronizes LDP with the IGP on the current
interface. The
no version removes the configuration for the interface.
In Router Configuration mode, synchronizes LDP with the IGP on all of the protocol's
interfaces, on all interfaces in the specified level (IS-IS), or on all interfaces in the
specified area (OSPF). The
no version removes the configuration for all qualifying
interfaces.
By default, LDP synchronization is not configured.
LDP—IGP synchronization must be configured on both sides of a link to be effective
and avoid asymmetric link costs. In addition, LDP-IGP synchronization is effective
only when alternate links with adequate bandwidth are available in the network.
Options
■
level-1—Enables synchronization with LDP on all IS-IS level 1 interfaces
■
level-1-2—Enables synchronization with LDP on all IS-IS level 1-2 interfaces
■
level-2—Enables synchronization with LDP on all IS-IS level-2–only interfaces
■
areaId —OSPF area ID in IP address format
■
areaIdInt —OSPF area ID as a decimal value in the range 1–4294967295
Mode
Interface Configuration, Router Configuration, Subinterface Configuration
1376 ■
mpls ldp sync
JUNOSe 11.1.x Command Reference Guide A to M