Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 624 / 1506

ethernet oam lfm high-threshold
Syntax
[ no ] ethernet oam lfm high-threshold { disable-interface | failover }
Release Information
Command introduced in JUNOSe Release 11.1.0.
Description
Configures a specific action to occur when a high threshold for an error is exceeded
on an Ethernet OAM interface. The
no version removes the high-threshold action
from the interface of the local OAM client and causes no action to be performed
when local errors occur on the interface.
Options
disable-interface—Sets the OAM functionality to unconditionally attempt to
influence the operational state of the interface to down. If the interface is a
■
member link of a LAG bundle and at least one other viable link (redundant
member or another active/up link) is present, OAM attempts to influence the
operational state of the link to down. Otherwise, no action is taken
■
failover—On GE-2 and GE-HDE line modules with GE-2 SFP I/O modules with
physical link redundancy, causes the link to transition from active to redundant
Mode
Interface Configuration
Related Topics
OAM Link Monitoring Feature
■
■
Configuring 802.3ah OAM Link-Fault Management
■
Example: Configuring 802.3ah OAM Link-Fault Management and Enabling Remote
Failure Monitoring on an Interface
582 ■
ethernet oam lfm high-threshold
JUNOSe 11.1.x Command Reference Guide A to M