Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 157 / 1506

aps events
Syntax
aps events list [ list ]*
no aps events
Release Information
Command introduced in JUNOSe Release 7.2.0.
Description
Enables line modules to deliver APS events to the necessary SNMP traps. You can
configure notification for specific events. The
no version disables the delivery of APS
events from line modules to SNMP traps.
Options
list —One of the following APS events:
■
■
all—Configures notification of all APS events
■
channel-mismatch—Configures notification of APS channel mismatches
■
feplf—Configures notification of APS far-end protection line failures
■
mode-mismatch—Configures notification of APS mode mismatches
■
psbf—Configures notification of APS protection signal byte failures
■
switchover—Configures notification of APS switchovers
■
*—Indicates that one or more parameters can be repeated multiple times
in a list in the command line
Mode
Global Configuration
aps events
■ 115
Chapter 2: A Commands