Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 260 / 1506

baseline atm vp interface
Syntax
baseline atm vp interface atm interfaceSpecifier vpi
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Sets a statistics baseline for an ATM virtual path (VP) interface. The router implements
the baseline by reading and storing the statistics at the time the baseline is set and
then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no
no version.
Options
interfaceSpecifier— ATM interface specifier; see Interface Types and Specifiers
on page 5
■
■
vpi —Virtual path identifier of the PVC. The numeric range depends on the line
module capabilities and current configuration.
Mode
Privileged Exec
218 ■
baseline atm vp interface
JUNOSe 11.1.x Command Reference Guide A to M