Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Command Reference Manual

Page: 817 / 1506

ip dhcp-local limit
Syntax
ip dhcp-local limit
{ atm | ethernet | pos | vlan | interface
InterfaceType InterfaceSpecifier } value
no ip dhcp-local limit [ atm | ethernet | pos | vlan
| interface
InterfaceType InterfaceSpecifier ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
interface keyword and interfaceType and interfaceSpecifier variables added in JUNOSe
Release 7.1.0.
pos keyword added in JUNOSe Release 10.0.0.
Description
Specifies the maximum number of IP addresses that the DHCP local server can supply
to each VPI/VCI, VLAN, Ethernet subnetwork, or POS access interface, or to a particular
interface or subinterface. The
no version restores the default address limit value,
48000.
Options
■
atm—Specifies the limit for VPIs and VCIs
■
ethernet—Specifies the limit for Ethernet subnets
■
pos—Specifies the limit for POS access interfaces
■
vlan—Specifies the limit for VLANs
■
interfaceType —Interface type; see “Interface Types and Specifiers” on page 5
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
value —Maximum number of leases, in the range 0–96000; default is 48000
Mode
Global Configuration
ip dhcp-local limit
■ 775
Chapter 10: I Commands